+ 1 (754) 900 - 3330
AS011M Small Fragment Instruments Set | ||
Set Consisting of : | Units | |
260.250 - Drill Bit 2.5mm Dia | 2 | |
260.350 - Drill Bit 3.5mm Dia | 2 | |
1 | ||
264.025 - Tap of 3.5mm Cortex Screw | 2 | |
264.038 - Tap of 4.0mm Cancellous Screw | 2 | |
306.010 - Quick Coupling Handle (T-Type) | 1 | |
307.060 - Drill & Tap Sleeve Combined 3.5/2.5mm | 1 | |
307.090 - Insert Drill Sleeve 2.5mm / 3.5mm | 1 | 301.060 - Screw Driver Shaft, Q.C. End - 2.5mm Tip
|
1 |
1 | ||
303.010 - Depth Gauge Small | 1 | |
371.000 - Sharp Hook | 1 | |
302.010 - Small Plate Bender for Plates 2.7 & 3.5mm | 1 | |
340.020 - Self Centering Bone Holding Forceps- 190mm | 1 | |
379.015 - Hohman Retractors, Small, 8mm Wide, 160mm | 2 | |
381.012 - Periosteal Elevator, Straight/Curved 12mm | 1 | |
379.020 - Hohman Retractors, 15mm Wide, 160mm | 2 | |
341.025 - Reduction Forceps, Serrated - 140mm | 1 | |
342.035 - Reduction Forceps, Pointed - 140mm | 1 | |
304.010 - Neutral and Loaded Drill Guide (Small) | 1 | |
900.029 - Empty Container |
Optional Instruments for Small Fragments | ||
263.020 - Bone Tap with T-Handle | ||
261.620 - Drill Bit - Plain Shank / Jacob Chuck End | ||
306.020 - Quick Coupling Fibre Handle with Rotation | ||
306.030 - Quick Coupling Adaptor with Jacob End for Drill Machine | ||
301.010 - Lane Screw Driver | ||
301.040 - Small Hexagonal Screw Driver 2.5mm Tip
|
||
307.010 - Drill Sleeve 2.0mm | ||
307.020 - Drill Sleeve 2.5mm | ||
302.070 - Plate Bending Press | ||
310.020 - Hollow Mill for Removal of Screws Medium - for 3.5mm Screws | ||
310.010 - Hollow Mill for Removal of Drill Bits | ||
309.000 - Screw Holding Forceps | ||
302.071 - Plate Bender for Small Fragment Plates |
Q.011 Small Fragment Instruments Set | ||
Set Consisting of : | Units | |
Q.011.01 - Neutral & Loaded Drill Guide Ø 2.5 | 1 | |
Q.011.02 - Drill & Tap Guide (Ø 2.5/ Ø 3.5) | 1 | |
Q.011.03 - Drill & Tap Guide (Ø 3.2/ Ø 4.0) | 1 | |
Q.011.04 - Drill Bit Ø 2.5 x 115mm | 2 | |
Q.011.05 - Drill Bit Ø 3.2 x 115mm | 2 | |
Q.011.06 - Oblique Reduction Forcep 170mm | 1 | |
Q.011.07 - Bending Iron | 2 | |
Q.011.08 - Periosteal Elevator 6mm | 1 | Q.011.09 - Tap for 4.0mm Cancellous Screw | 1 |
Q.011.10 - Depth Gauge (0-60mm) | 1 | |
Q.011.11 - Countersink 6mm | 1 | |
Q.011.12 - Extraction Screw Hexagonal 2.5mm Conical | 1 | |
Q.011.13 - Periosteal Elevator 12mm | 1 | |
Q.011.14 - Hollow Mill Reamer Ø 6.0 | 1 | |
Q.011.15 -Tap for 3.5mm Cortex Screw | 1 | |
Q.011.16 - Hexagonal Screwdriver 2.5mm (Silicon Handle) | 1 | |
Q.011.17 - Self Centering Bone Holding Forcep 190mm | 2 | |
Q.011.18 - Sharp Reduction Forcep 190mm | 1 | |
Q.011.19 - Quick Coupling Handle (T-Type) | 1 | |
Q.011.000 - Empty Container with Screw Rack |