NARANG MEDICAL USA CORPORATION
www.netorthopedics.com
+ 1 (754) 900 - 3330
| AS080 Instruments Set for 4.0mm Cannulated Cancellous Screws | ||
| Set Consisting of : | Units | |
| 800.051 - Quick Coupling Tap Handle Cannualted | 1 | |
| 800.054 - Holding Clip | 1 | |
800.057 - Threaded Guide Wire 1.2mm x 150mm
|
10 | |
| 800.060 - Stylet 1.2mm, Length 280mm | 1 | |
| 800.063 - Double Drill Sleeve 2.7 / 1.25mm | 1 | |
| 800.066 - Drill & Tap Sleeve 2.5 / 3.5mm | 1 | |
| 800.069 - Cannulated Counter Sink - T-Handle (6mm Head, Length 150mm) | 1 | |
| 800.073 - Direct Measuring Device | 1 | |
| 800.075 - Cannulated Tap 4.0mm x 150mm, T-handle | 1 | |
| 800.078 - Cannulated Hexagonal Screw Driver 2.5mm Tip | 1 | |
| 800.080 - Cannulated Drill Bit Plain Shank 2.0mm, Length 100mm | 1 | |
| 800.081 - Cannulated Drill Bit Plain Shank 2.7mm, Length 160mm | 1 | |
| 800.084 - Cannulated Drill Bit Plain Shant, 3.5mm, Length 160mm | 1 | |
| 800.087 - Drill Guide with Stop with two inserts 3.5mm / 2.7mm | 1 | |
| 900.053 - Empty Container | ||
| Q.080 Instruments Set For 4.0mm Cannulated Cancellous Screws Q-SERIES | ||
| Set Consisting of : | Units | |
| Q.080.01 - Depth Gauge (0-70mm) | 1 | |
| Q.080.02 - Cleaning Stylet 1.2mm | 1 | |
Q.080.03 - Threaded Guide Wire 1.2mm
|
4 | |
| Q.080.04 - Cannulated Drill Bit with Limited Block 2.7mm | 1 | |
| Q.080.05- Hexagonal Screwdriver 2.5mm Tip | 1 | |
| Q.080.06 - Cannulated Tap for Cannulated Screw 4.0mm | 1 | |
| Q.080.07 - Cannulated Hexagonal Screwdriver 2.5mm Tip | 1 | |
| Q.080.08 - Cannulated Countersink Ø6.5mm | 1 | |
| Q.080.09 - Hex Key | 1 | |
| Q.080.10 - Drill Sleeve 1.2mm | 1 | |
| Q.080.11 - Protection Sleeve | 1 | |
| Q.080.000 - Empty Container with Screw Rack | ||
